40PV - SP Centrifugal Vertical Submerged Pump , Sand Pumping Vertical Slurry Pump

Product Introduction

40PV - SP Submerged Centrifugal Pump , Sand Pumping Vertical Slurry Pump is a single-stage, single-suction cantilever structure, suitable for conveying abrasive, coarse particles and high concentration slurry. Pumps generally invade the pool or work inside the pit. It does not require any shaft seals and shaft seals to work properly under inhaled conditions. The SP type flow element and shaft are made of metal and are suitable for conveying abrasive slurry. The SP type submerged pump is widely used in metallurgy, mining, coal, electric power, building materials and other departments.

The 40PV - SP Submerged Centrifugal Pump is a vertical centrifugal slurry pump with the pump inlet vertically downward and the outlet vertically up on the other side of the pump.

The pump is mainly composed of lower filter screen, pump body, impeller, shaft, guard plate, bracket and other parts. The upper part of the pump has bearing support; the pump is installed under the liquid, no shaft seal is required, and the overcurrent parts are made of wear-resistant materials.

The transmission type of SP type of pump is BD and DC, namely belt drive and direct drive. The depth under the immersion liquid can be determined according to the actual needs of the user within the standard size range.

 
Type meaning
 
40 PV - SP (R)
65---------------Discharge Diameter (mm)
PV---------------Support Type
SP---------------Sump pump
R-----------------Rubber lined 
 
Specifications

 
Usage
 
Submerged and vertical slurry pumps are mainly applicable to transport abrasive, coarse particle, high concentration slurry. They are widely used in metallurgy, mining, coal, electric power, building materials, environmental protection and other departments.
   

 
Performance Chart

Construction Drawing