2 / 3C - Heavy Centrifugal Slurry Pump 380V For Coal Industry

2 / 3C- Heavy Centrifugal Slurry Pump For The Coal Industry

Product introduction

2 / 3C- Heavy Centrifugal Slurry Pump Is currently the mineral processing, coal preparation plant one of the indispensable equipment in each technological process,In the coal washing industry, due to the different working conditions, large coal, coal gangue is easy to jam to the design of the slurry pump is very demanding,Such as Huaibei mining bureau subordinate a certain coal washery 05 using specially designed, replace the original slurry pump imported from Australia, now operating normally, transporting large coal, coal gangue without clogging.

Model meaning 

4 / 3 C - (R)

4------------Suction diameter(Inch)

3------------Discharge diameter(Inch)

C-----------Support type

-------- Pump Model

R-----------Natural Rubber

Specifications

Centrifugal slurry pump working principle:

1. Before the pump works, the staff must first inject the liquid used for conveying into the pipeline and the pump casing, and fill the two;

2. When the slurry pump is started, the liquid in the impeller will be rotated by the blades of the impeller;

3. Under the action of centrifugal force, the liquid rotates forward and then flows out of the impeller;

4. During the process of flowing the liquid from the impeller inlet to the impeller outlet, the velocity energy and the pressure energy are increased due to the energy conversion, and the liquid flowing out from the impeller is discharged through the pump casing flow passage and then discharged from the discharge pipe;

5. At this time, the impeller inlet is formed by the discharge of water, and the liquid in the suction surface is pressed into the water inlet of the impeller under the action of atmospheric pressure;

6. The rotating impeller continuously draws in and drains water to form a continuous stream of water.

Typical Applications:

Ash Handling

Pulp and Paper

Abrasive Slurries

Coal Preparation

Mineral Processing

Aggregate Processing

Construction Design

Shaft Seal Module Design

Performance table