Product Details:
Payment & Shipping Terms:
|
| Material: | A05/A49 | Inlet: | 1.5 Inch |
|---|---|---|---|
| Outlet: | 1 Inch | Wear Parts: | Interchangeable |
| Impeller: | Closed Impeller | Structure: | Single Suction |
| High Light: | high density solids pump,sand slurry pump |
||
Product overview
1.Type 1.5/1B - slurry pumps are cantilevered,horizontal,centrifugal slurry pumps , and the inner liner is made of cemented carbide or rubber with good wear resistance, corrosion resistance and high reliability.
2.Shaft seals are filled with packing, impeller seals and cartridge mechanical seals to suit different operating conditions.
3.The pump outlet direction of Suppory Type B can be rotated at 4 angles to accommodate different field installation conditions.
4. The Type 1.5/1B - slurry pump is the smallest model of the series and can be used for small beneficiation, building materials etc.
1.5 /1 B - Specifications
| Allowable Max.Power | 15 kw |
| Capacity | 12.6 - 28.8 m³/h |
| Head | 6 - 68 m |
| Speed | 1200 - 3800 r/min |
| Max.Efficiency | 40% |
| NPSH | 2 - 4 m |
| Impeller Diameter | 152 mm |
Typical Applications:
-Ash Handling
-Cyclone Feeds
-Pulp and Paper
-Abrasive Slurries
-Coal Preparation
-Mineral Processing
-Water and Sewage Treatment
Feature
1. The frame plates for slurry pump have replaceable wear-resistant metal liners or rubber liners.
2. The impellers are made of wear-resistant metal or rubber. The frame plate liner and impeller for slurry pump are adoptable of hard metal only.
3. Bearing assembly use cylindrical structure,adjusting the space between impeller and front liner easily, being removed completely when being repaired. Bearing assembly use grease lubrication.
4. The shaft seal could use the packing seal, expeller seal and mechanical seal.
5. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications
Type meaning
| Type meaning for 1.5 /1 B - (R) | |
| 1.5/1 B-(R) slurry pump | |
| 1.5 | Pump inlet size (inch) |
| 1 | Pump outlet size (inch) |
| B | Bracket type |
| Pump model | |
| R | R-Rubber liner pump |
Performance table of (R)/HH centrifugal slurry pump
| MODEL | ALLOWABLE MATING MAX.POWER (KW) |
MATERIAL | CLEAN WATER PERFORANCE | IMPELLER | ||||||||
| LINER | IMPELLER | Q Capacity | H Head | Speed | Max. Eff. | NPSH | VANES NO. | IMPELLER DIA | ||||
| m3/h | L/s | (m) | n(r/min) | (%) | (m) | (mm) | ||||||
| 1.5/1B- | 15 | M | M | 12.6-28.8 | 3.5-8 | 6-68 | 1200-3800 | 40 | 2--4 | 5 | 152 | |
| RU | RU | 10.8-25.2 | 3--7 | 7-52 | 1400-3400 | 30 | 3 | |||||
| 1.5/1C-HH | 30 | M | M | 16.2-34.2 | 4.5-9.5 | 25-92 | 1400-2200 | 20 | 2-5.5 | 5 | 330 | |
| 2/1.5B- | 15 | M | M | 32.4-72 | 9--20 | 6-58 | 1200-3200 | 45 | 3.5-8 | 5 | 184 | |
| RU | RU | 25.2-54 | 7--15 | 5.5--41 | 1000-2600 | 50 | 2.5-5 | 5 | 178 | |||
| 3/2C- | 30 | M | M | 39.6-86.4 | 11--24 | 12-64 | 1300-2700 | 55 | 4--6 | 5 | 214 | |
| RU | RU | 36-75.6 | 10--21 | 13-46 | 1300-2300 | 60 | 2--4 | 5 | 213 | |||
| 3/2D-HH | 60 | M | M | 68.4-136.8 | 19-38 | 25-87 | 850-1400 | 47 | 3-7.5 | 5 | 457 | |
| 4/3C- | 30 | M | M | 86.4-198 | 24-55 | 9-52 | 1000-2200 | 71 | 4--6 | 5 | 245 | |
| RU | RU | 79.2-180 | 22-50 | 5-34.5 | 800-1800 | 59 | 3--5 | |||||
| 4/3E-HH | 120 | M | M | 126-252 | 35-70 | 12-97 | 600-1400 | 50 | 2--5 | 5 | 508 | |
| 6/4D- | 60 | M | M | 162-360 | 45-100 | 12-56 | 800-1550 | 65 | 5--8 | 5 | 365 | |
| RU | RU | 144-324 | 40-90 | 12-45 | 800-1350 | 65 | 3--5 | 5 | 365 | |||
| 6/4S-HH | 560 | M | M | 324-720 | 90-200 | 30-118 | 600-1000 | 64 | 3-8 | 5 | 711 | |
| 8/6S-HH | 560 | M | M | 468-1008 | 130-280 | 20-94 | 500-1000 | 65 | 4-12 | 5 | 711 | |
| 8/6R- | 300 | M | M | 360-828 | 100-230 | 10-61 | 500-1140 | 72 | 2-9 | 5 | 510 | |
| RU | RU | 324-720 | 90-200 | 7-49 | 400-1000 | 65 | 5-10 | 5 | 510 | |||
| 10/8E-M | 120 | M | M | 666-1440 | 185-400 | 14-60 | 600-1100 | 73 | 4-10 | 5 | 549 | |
| 10/8ST- | 560 | M | M | 612-1368 | 170-380 | 11-61 | 400-850 | 71 | 4-10 | 5 | 686 | |
| RU | RU | 540-1118 | 150-330 | 12-50 | 400-750 | 75 | 4-12 | |||||
| 12/10ST- | 560 | M | M | 936-1980 | 260-550 | 7-68 | 300-800 | 82 | 6 | 5 | 762 | |
| RU | RU | 720-1620 | 200-450 | 7-45 | 300-650 | 80 | 2.5-7.5 | |||||
| 14/12ST- | 560 | M | M | 1260-2772 | 350-770 | 13-63 | 300-600 | 77 | 3-8 | 5 | 965 | |
| RU | RU | 1152-2520 | 320-700 | 13-44 | 300-500 | 79 | 3-10 | |||||
| 16/14TU- | 1200 | M | M | 1368-3060 | 380-850 | 11-63 | 250-550 | 79 | 4-10 | 5 | 1067 | |
| 20/18TU- | 1200 | M | M | 2520-5400 | 700-1500 | 13-57 | 200-400 | 85 | 5-10 | 5 | 1370 | |
(R)/HH/M(R) Series Slurry Pump Construction Design
Selection And Performance Chart
Tel: 86-- 031180809622
Fax: 86--031168050656
