Product Details:
Payment & Shipping Terms:
|
Material: | A05/A49 | Model: | 200ZJ-A70 |
---|---|---|---|
Theory: | Centrifugal | Shaft: | Horizontal |
Impeller Structure: | Closed Impeller | Drive: | Electric/diesel |
High Light: | high capacity centrifugal pumps,centrifugal force pump |
The ZJ horizontal slurry pump is an axial suction, single-stage single-suction, cantilever horizontal centrifugal slurry pump. This type of pump adopts the international advanced solid-liquid two-phase flow theory and is designed according to the principle of minimum loss. The geometry of the flow-passing component conforms to the flow state of the medium, reducing local and coastal hydraulic losses such as eddy currents and impacts, thereby reducing wear of the overcurrent components, improving hydraulic efficiency, and reducing operating noise and vibration; The flow-through part is made of high-chromium wear-resistant alloy cast iron, which has strong anti-wear, anti-corrosion and anti-shock properties, which improves its service life. In addition, the series of pumps use power step-down to ensure that the slurry is not easy to leak.
Main features:
ZJ series slurry pump is a single-stage single-suction centrifugal slurry pump (can be operated in series according to customer requirements). The over-flow component is made of high-chromium wear-resistant alloy cast iron. It has wear resistance, high efficiency, energy saving, long service life, reasonable structure and operation. Remarkable features such as reliability, low vibration, low noise and easy maintenance.
Maintenance
1. The characteristics of the slurry pump determine the choice of the material of the slurry pump. The slurry pump is a centrifugal pump that transports a slurry containing solid particles. It should be a pure liquid that is transported. The pressure of the cooling water sealed by the external washing machine should not be too large, and the general condition is not higher than the flow rate, and it can usually flow naturally.
2. The pressure of the cooling water for the internal flushing machine seal should be higher than the working pressure in the sealed chamber.
3. Start the submersible slurry pump every time the water to be flushed or the cooling water is turned on for five minutes.
4. Stop the rinse or cooling water after stopping the slurry pump for five minutes.
5, mechanical seals are not allowed to run without flushing water or cooling water or dry friction.
Parameters
Model | 200ZJ-A70 |
Allowable Max.Power | 315 KW |
Capacity | 205-976 m³/h |
Head | 19.4-86.4 m |
Speed | 490-980 r/min |
Max.Eff. | 75.6 % |
NPSH | 2.8 m |
Particle Max.Size Handled Occasionally | 56 mm |
Pump Weight | 2465 kg |
Performance table
Model | Capacity | Head | Speed | NPSHr | Efficiency | Power | Weight | Dia.of pump(mm) | |
(m3/h) | (m) | (r/min) | (m) | (%) | (kw) | (kg) | Inlet | Outlet | |
40ZJ-I-A17 | 18 | 42.7 | 2900 | 4.5 | 49.5 | 7.5 | 230 | 40 | 40 |
40ZJ-I-A17 | 9 | 9.9 | 1400 | 2.5 | 49.5 | 1.1 | 230 | 40 | 40 |
50ZJ-I-A33 | 40 | 40 | 1480 | 6 | 40.6 | 18.5 | 680 | 80 | 50 |
50ZJ-I-A33 | 26 | 16.8 | 960 | 2.9 | 40.6 | 5.5 | 680 | 80 | 50 |
50ZJ-I-A46 | 77 | 82.3 | 1480 | 2.9 | 41.6 | 55 | 690 | 80 | 50 |
50ZJ-I-A46 | 50 | 35.4 | 970 | 1.4 | 41.7 | 15 | 690 | 80 | 50 |
50ZJ-I-A50 | 91 | 105.5 | 1480 | 3.8 | 43 | 75 | 1078 | 80 | 50 |
50ZJ-I-A50 | 60 | 46.3 | 980 | 3 | 43 | 30 | 1078 | 80 | 50 |
65ZJ-I-A27 | 56 | 27.5 | 1460 | 2.7 | 60 | 11 | 795 | 100 | 65 |
65ZJ-I-A27 | 37 | 11.9 | 960 | 1.8 | 60 | 4 | 795 | 100 | 65 |
65ZJ-I-A30 | 62 | 33.9 | 1460 | 3 | 62 | 15 | 820 | 100 | 65 |
65ZJ-I-A30 | 41 | 14.7 | 960 | 2 | 62 | 5.5 | 820 | 100 | 65 |
80ZJ-I-A33 | 128 | 40.3 | 1480 | 3.4 | 64 | 30 | 860 | 125 | 80 |
80ZJ-I-A33 | 85 | 17.6 | 980 | 2.3 | 64 | 11 | 860 | 125 | 80 |
80ZJ-I-A36 | 140 | 48 | 1480 | 3.7 | 66 | 37 | 885 | 125 | 80 |
80ZJ-I-A36 | 93 | 21 | 980 | 2.5 | 66 | 11 | 885 | 125 | 80 |
80ZJ-I-A39 | 158 | 57.9 | 1480 | 4 | 63 | 55 | 945 | 125 | 80 |
80ZJ-I-A39 | 105 | 25.4 | 980 | 2.4 | 63 | 18.5 | 945 | 125 | 80 |
80ZJ-I-A42 | 170 | 67.2 | 1480 | 4.2 | 65 | 75 | 970 | 125 | 80 |
80ZJ-I-A42 | 113 | 29.5 | 980 | 2.5 | 65 | 22 | 970 | 125 | 80 |
80ZJ-I-A52 | 182 | 105.5 | 1480 | 4.3 | 52 | 132 | 1080 | 125 | 80 |
80ZJ-I-A52 | 121 | 46.3 | 980 | 2.1 | 52.0 | 37 | 1080 | 150 | 80 |
100ZJ-I-A33 | 202 | 37.8 | 1480 | 3.2 | 69.0 | 37 | 870 | 150 | 100 |
100ZJ-I-A33 | 134 | 16.6 | 980 | 1.8 | 69.0 | 15 | 870 | 150 | 100 |
100ZJ-I-A36 | 220 | 45.0 | 1480 | 3.5 | 71.0 | 55 | 890 | 150 | 100 |
100ZJ-I-A36 | 146 | 19.7 | 980 | 2.0 | 71.0 | 15 | 890 | 150 | 100 |
100ZJ-I-A39 | 228 | 57.8 | 1480 | 3.8 | 66.0 | 75 | 1060 | 150 | 100 |
100ZJ-I-A39 | 150 | 25.4 | 980 | 2.4 | 66.0 | 22 | 1060 | 150 | 100 |
100ZJ-I-A42 | 245 | 67.0 | 1480 | 4.0 | 68.0 | 90 | 1078 | 150 | 100 |
100ZJ-I-A42 | 162 | 29.4 | 980 | 2.5 | 68.0 | 30 | 1078 | 150 | 100 |
100ZJ-I-B42 | 149 | 63.8 | 1480 | 2.8 | 61.0 | 55 | 1070 | 150 | 100 |
100ZJ-I-B42 | 99 | 28.0 | 980 | 1.8 | 61.0 | 18.5 | 1070 | 150 | 100 |
100ZJ-I-A46 | 176 | 80.4 | 1480 | 4.2 | 66.5 | 110 | 1310 | 150 | 100 |
100ZJ-I-A46 | 183 | 35.3 | 980 | 2.3 | 66.5 | 37 | 1310 | 150 | 100 |
100ZJ-I-A50 | 300 | 95.0 | 1480 | 4.5 | 68.5 | 132 | 1440 | 150 | 100 |
100ZJ-I-A50 | 199 | 41.7 | 980 | 2.5 | 68.5 | 45 | 1440 | 150 | 100 |
150ZJ-I-C42 | 450 | 58.0 | 1480 | 4.5 | 74.0 | 132 | 1550 | 200 | 200 |
150ZJ-I-C42 | 298 | 25.4 | 980 | 2.2 | 74.0 | 37 | 1550 | 200 | 200 |
150ZJ-I-A48 | 365 | 36.9 | 980 | 3.0 | 74.0 | 75 | 1610 | 200 | 200 |
150ZJ-I-A48 | 272 | 20.5 | 730 | 2.5 | 74.0 | 30 | 1610 | 200 | 200 |
150ZJ-I-A50 | 380 | 40.0 | 980 | 3.0 | 75.0 | 75 | 1630 | 200 | 150 |
150ZJ-I-A50 | 283 | 22.2 | 730 | 2.5 | 75.0 | 30 | 1630 | 200 | 150 |
150ZJ-I-A55 | 431 | 50.8 | 980 | 3.5 | 69.0 | 110 | 1760 | 200 | 150 |
150ZJ-I-A55 | 321 | 28.2 | 730 | 2.3 | 69.0 | 45 | 1760 | 200 | 150 |
150ZJ-I-A57 | 301 | 55.4 | 980 | 2.9 | 58.5 | 110 | 1800 | 200 | 150 |
150ZJ-I-A57 | 224 | 30.7 | 730 | 1.8 | 58.5 | 45 | 1800 | 200 | 150 |
150ZJ-I-C58 | 458 | 56.0 | 980 | 3.2 | 66.2 | 132 | 1760 | 200 | 150 |
150ZJ-I-C58 | 341 | 31.1 | 730 | 2.0 | 66.2 | 55 | 1760 | 200 | 150 |
150ZJ-I-A58 | 454 | 56.5 | 980 | 3.8 | 71.0 | 132 | 1780 | 200 | 150 |
150ZJ-I-A58 | 338 | 31.4 | 730 | 2.5 | 71.0 | 55 | 1780 | 200 | 150 |
150ZJ-I-A60 | 470 | 60.5 | 980 | 3.8 | 72.0 | 132 | 1800 | 200 | 150 |
150ZJ-I-A60 | 350 | 33.6 | 730 | 2.5 | 72.0 | 55 | 1800 | 200 | 150 |
150ZJ-I-A63 | 485 | 68.6 | 980 | 4.0 | 68.0 | 160 | 2050 | 200 | 150 |
150ZJ-I-A63 | 361 | 38.0 | 730 | 2.5 | 68.0 | 75 | 2050 | 200 | 150 |
150ZJ-I-A65 | 500 | 73.0 | 980 | 4.0 | 69.0 | 185 | 2100 | 200 | 150 |
150ZJ-I-A65 | 372 | 40.5 | 730 | 2.5 | 69.0 | 75 | 2100 | 200 | 150 |
150ZJ-I-A70 | 285 | 87.1 | 980 | 3.0 | 58.4 | 160 | 2985 | 200 | 150 |
150ZJ-I-A70 | 212 | 48.3 | 730 | 2.0 | 58.4 | 75 | 2985 | 200 | 150 |
200ZJ-I-A58 | 715 | 54.2 | 980 | 4.0 | 79.0 | 160 | 2380 | 250 | 200 |
200ZJ-I-A58 | 533 | 30.1 | 730 | 2.5 | 79.0 | 75 | 2380 | 250 | 200 |
200ZJ-I-A60 | 740 | 58.0 | 980 | 4.0 | 80 | 185 | 2400 | 250 | 200 |
200ZJ-I-A60 | 551 | 32.2 | 730 | 2.5 | 80.0 | 90 | 2400 | 250 | 200 |
200ZJ-I-A63 | 795 | 64.0 | 980 | 4.3 | 76.0 | 220 | 2430 | 250 | 200 |
200ZJ-I-A63 | 592 | 65.5 | 730 | 2.5 | 76.0 | 110 | 2430 | 250 | 200 |
200ZJ-I-A65 | 820 | 68.1 | 980 | 4.3 | 77.0 | 250 | 2450 | 250 | 200 |
200ZJ-I-A65 | 611 | 37.8 | 730 | 2.5 | 77.0 | 110 | 2450 | 250 | 200 |
200ZJ-I-A68 | 717 | 77.7 | 980 | 3.8 | 70.7 | 250 | 3140 | 250 | 200 |
200ZJ-I-A68 | 534 | 43.1 | 730 | 2.8 | 70.7 | 110 | 3140 | 250 | 200 |
200ZJ-I-A70 | 738 | 82.3 | 980 | 3.8 | 71.7 | 280 | 3160 | 250 | 200 |
200ZJ-I-A70 | 550 | 45.7 | 730 | 2.8 | 71.7 | 132 | 3160 | 250 | 200 |
200ZJ-I-A73 | 730 | 90.7 | 980 | 4.5 | 71.0 | 315 | 3190 | 250 | 200 |
200ZJ-I-A73 | 544 | 50.3 | 730 | 3.0 | 71.0 | 132 | 3160 | 250 | 200 |
200ZJ-I-A75 | 750 | 95.7 | 980 | 4.5 | 72.0 | 355 | 3200 | 250 | 200 |
200ZJ-I-A75 | 559 | 53.1 | 730 | 3.0 | 72.0 | 132 | 3200 | 250 | 200 |
200ZJ-I-A85 | 858 | 128.2 | 980 | 5.0 | 68.4 | 560 | 4150 | 250 | 200 |
200ZJ-I-A85 | 639 | 71.1 | 730 | 2.8 | 68.4 | 220 | 4150 | 250 | 200 |
250ZJ-I-A60 | 895 | 56.4 | 980 | 4.2 | 72.0 | 250 | 3530 | 300 | 250 |
250ZJ-I-A60 | 667 | 31.3 | 730 | 2.8 | 72.0 | 110 | 3530 | 300 | 250 |
250ZJ-I-A63 | 940 | 62.2 | 980 | 4.5 | 74 | 250 | 3530 | 300 | 250 |
250ZJ-I-A63 | 701 | 34.5 | 730 | 3.0 | 74.0 | 110 | 3540 | 300 | 250 |
250ZJ-I-A65 | 970 | 66.2 | 980 | 4.5 | 75.0 | 280 | 3550 | 300 | 250 |
250ZJ-I-A65 | 723 | 36.7 | 730 | 3.0 | 75.0 | 132 | 3550 | 300 | 250 |
250ZJ-I-A68 | 997 | 75.6 | 980 | 3.7 | 72.0 | 355 | 3560 | 300 | 250 |
250ZJ-I-A68 | 743 | 41.9 | 730 | 2.7 | 72.0 | 160 | 3560 | 300 | 250 |
250ZJ-I-A70 | 1027 | 80.1 | 980 | 3.9 | 73.0 | 400 | 3570 | 300 | 250 |
250ZJ-I-A70 | 764 | 44.4 | 730 | 2.9 | 73.0 | 160 | 3570 | 300 | 250 |
250ZJ-I-A73 | 1071 | 87.2 | 980 | 4.1 | 75.0 | 400 | 3590 | 300 | 250 |
250ZJ-I-A73 | 797 | 48.3 | 730 | 3.0 | 75.0 | 185 | 3590 | 300 | 250 |
250ZJ-I-A75 | 1100 | 92.0 | 980 | 4.1 | 76.0 | 450 | 3600 | 300 | 250 |
250ZJ-I-A75 | 819 | 51.0 | 730 | 3.0 | 76.0 | 185 | 3600 | 300 | 250 |
250ZJ-I-A78 | 1145 | 104.8 | 980 | 5.1 | 67.0 | 630 | 4620 | 300 | 250 |
250ZJ-I-A78 | 853 | 58.1 | 730 | 3.2 | 67.0 | 250 | 4620 | 300 | 250 |
250ZJ-I-A80 | 1175 | 110.2 | 980 | 5.4 | 69.0 | 630 | 4630 | 300 | 250 |
250ZJ-I-A80 | 875 | 61.1 | 730 | 3.4 | 69.0 | 280 | 4630 | 300 | 250 |
250ZJ-I-A83 | 1219 | 118.6 | 980 | 5.5 | 71.0 | 710 | 4665 | 300 | 250 |
250ZJ-I-A83 | 908 | 65.8 | 730 | 3.5 | 71.0 | 280 | 4665 | 300 | 250 |
250ZJ-I-A85 | 1248 | 124.4 | 980 | 5.5 | 72.0 | 710 | 4686 | 300 | 250 |
250ZJ-I-A85 | 930 | 69.0 | 30 | 3.5 | 72.0 | 315 | 4686 | 300 | 250 |
250ZJ-I-A90 | 1009 | 78.1 7 | 730 | 5.5 | 70.0 | 400 | 5150 | 300 | 250 |
250ZJ-I-A90 | 816 | 51.7 | 590 | 3.5 | 70.0 | 200 | 5150 | 300 | 250 |
250ZJ-I-A96 | 1076 | 90 | 730 | 5.5 | 74 | 450 | 5200 | 300 | 250 |
250ZJ-I-A96 | 870 | 58.8 | 590 | 3.5 | 74 | 250 | 5200 | 300 | 250 |
250ZJ-I-A103 | 1067 | 106.7 | 730 | 4.3 | 69.6 | 560 | 5650 | 300 | 250 |
250ZJ-I-A103 | 862 | 69.7 | 590 | 2.8 | 69.6 | 280 | 5650 | 300 | 250 |
300ZJ-I-A56 | 1415 | 40.8 | 980 | 5.5 | 80.4 | 250 | 2950 | 350 | 300 |
300ZJ-I-A56 | 1054 | 22.6 | 730 | 3.5 | 80.4 | 110 | 2950 | 350 | 300 |
300ZJ-I-A65 | 1967 | 57.5 | 980 | 6.6 | 77 | 500 | 4000 | 350 | 300 |
300ZJ-I-A65 | 1465 | 31.9 | 730 | 3.7 | 77 | 200 | 4000 | 350 | 300 |
300ZJ-I-A70 | 2118 | 66.7 | 980 | 7 | 80 | 630 | 4150 | 350 | 300 |
300ZJ-I-A70 | 1578 | 37.01 | 730 | 3.9 | 80 | 250 | 4150 | 350 | 300 |
300ZJ-I-A85 | 1556 | 65.6 | 730 | 5.6 | 77.5 | 450 | 4850 | 350 | 300 |
300ZJ-I-A85 | 1285 | 42.9 | 590 | 3.8 | 77.5 | 220 | 4850 | 350 | 300 |
300ZJ-I-A90 | 1648 | 73.6 | 730 | 5.7 | 80.5 | 500 | 5000 | 350 | 300 |
300ZJ-I-A90 | 1332 | 48.1 | 590 | 3.9 | 80.5 | 280 | 5000 | 400 | 300 |
300ZJ-I-A95 | 1696 | 53.9 | 590 | 4.1 | 77.4 | 400 | 5600 | 400 | 300 |
300ZJ-I-A95 | 1408 | 37.2 | 490 | 3 | 77.4 | 220 | 5600 | 400 | 300 |
300ZJ-I-A100 | 1785 | 59.7 | 590 | 4.1 | 80.4 | 450 | 5750 | 400 | 300 |
300ZJ-I-A100 | 1482 | 41.2 | 490 | 3 | 80.4 | 250 | 5750 | 400 | 300 |
Quality control
Inspection Equipment | |
1. Inspection and Detection | |
With various inspection and detection instruments ,like three-coordinate measuring instrument ,metallographic microscope, direct reading spectrometer ,Brinell hardness meter ,Vickers hardness meter, carbon and sulfur analyzer and other detection equipment,we can carry on the chemical composition analysis ,physical properties test ,coordinate measurement for various steel&steel materials | |
Complete pump set inspection | |
We have performance testing platform for each batch pump inspection before delivery | |
Quality control system for each set slurry pump | |
Purchasing raw material ra |
1. Strict rules and procedures to choose the raw material supplier |
2. Each batch raw material will be tested by quality control department | |
C casting of parts
|
1 .Melting:Chemical element analysis for raw material before and after stove . |
2.Moulding :Strict sand moulding qualified before iron liquid pouring for casting | |
3. Cleaning semi-finished parts sand :Strict inspection on the appearance and size qualified before storage. | |
|
1. Self -inspection and inspection between different steps. |
2. First part inspection | |
3. Procedures inspection | |
4..Inspection before storage the mining slurry pumps | |
A Assembling of sl slurry pump |
1. Inspector tracks the whole process of assembly of slurry pumps |
2. Slurry Pump pressure inspection and fillout the testing table | |
3. Painting inspection | |
4. Performance testing and fillout the testing table | |
5. Packing inspection of slurry pump | |
6. Issue quality certificate |
Structural Drawing
Tel: 86-- 031180809622
Fax: 86--031168050656