Middle Pressure Slurry Pump Natural Rubber Lined Anti - Abrasive For Mining

Middle Pressure Slurry Pump Natural Rubber Lined Anti - Abrasive For Mining

Product overview

Pump performance range is wide, cavitation performance is good, high efficiency. Multi-stage series technology can be used to meet the long-distance transport. Overflow components have a variety of metal options, and increase the depth. Adopt a variety of speed and a variety of variants, so that the pump operates in industry and mines. Long service life, high operating efficiency, energy. It satisfies many kinds of harsh transportation conditions.

Typical Applications:

Tailings

Heavy Mining

Ash Handling

Cyclone Feeds

Pulp and Paper

Corrosive Slurries

Coal Preparation

Mineral Processing

Aggregate Processing

Heavy Refusal Removal

Structural features

1. Unique wide flow channel and concave design of blade, strong overcurrent and anti-wear ability;

2, double-shell structure, the flow-through parts can be metal lining or rubber lining, and can be replaced with each other;

4, high-strength rigid overall bracket and large diameter shaft and short cantilever design, suitable for high power and severe working conditions;

5. Grease-lubricated tubular bearing assembly type, small maintenance, convenient rotor adjustment and easy maintenance;

6. The rotor components can be axially adjusted to ensure stable pump performance;

7, a variety of sealing types: packing seal, auxiliary impeller seal and mechanical seal arbitrarily selected;

8, can be used in multiple stages in series to meet long distance, high lift slurry transport.

Type meaning

8 / 6 E - Capacity Control

During the operation of the slurry pump, attention should be paid to the temperature and leakage of the packing gland. @Normal slurry pump 8/6E-R normal packing leakage should not exceed 10-20 drops per minute.
In the pump operation, if the slurry pump can take in air and it can be solid, it will make an abnormal sound and vibrate accordingly.
In the pump operation, if the backup valve of the standby machine leaks and the switching valve is always open, it should be noted that the backup machine is reversed due to the reverse flow.
When the pump regulates the flow during normal operation, it is not possible to reduce the flow rate by reducing the opening of the pump suction line valve. Otherwise, the pump inlet flow will be insufficient and the pump will cavitation.
In the pump operation, for the bearings that need cooling water, pay attention to the temperature and quantity of water, and try to keep the bearing temperature within the specified range.

Performance table

Construction Design