Product Details:
Payment & Shipping Terms:
|
| Duty Type: | Heavy Duty | Certificate: | CE, ISO, SGS |
|---|---|---|---|
| Theory: | Centrifugal Pump | Material: | High Chrome Alloy A05 |
| Use: | Deal Abrasive Slurries | Drive Type: | CV, DC(Z), ZV(Z), CR(Z) |
| High Light: | high density solids pump,dry sand pump |
||
Mechanical Or Packing Seal Metal Liner Heavy Duty Slurry Pump For Water Treatment
Main introduction of slurry pump
4/3D- is cantilever, horizontal double-shell axial suction centrifugal slurry pump.This type is a metal lined slurry pump suitable for abrasive slag, sand, sludge and silt. Once the wet-end parts are worn out, they can be replaced by the same material, or changed to natural rubber or polyurethane. The dimensions will all match, which is a very obvious advantage of SME slurry pumps. The pump can be driven by electric motor or diesel engine
Features
Pump body pump cover and flow parts: This series of pumps is horizontal, vertical medium form, double pump shell structure slurry pump. The pump body and pump cover have replaceable metal lining, and the inner lining material is high chrome wear resistant. Alloy material, the inner lining can be used until wear-through, extending the maintenance period and reducing the running cost. The outlet direction of the pump can be rotated and installed at 8 angles.
Bearing assembly: The bearing assembly of the pump adopts a cylindrical structure, which is convenient for adjusting the clearance between the impeller and the front guard plate. It can be removed as a whole during maintenance. The bearing is greased.
Shaft seal (sealing): The shaft seal type of the pump has packing seal, impeller seal, mechanical seal.
Transmission mode: V-type V-belt drive, flexible coupling drive, gear reducer drive, hydraulic coupling drive, variable frequency drive, thyristor speed control, etc. Among them, V-type V-belt drive has CL, CV, CR, ZL, ZV, ZR transmission.
Overall performance: wide pump performance range, good cavitation performance, high efficiency. Multi-stage series technology can be used to meet long-distance transportation. Over-current components are available in a variety of metals and increase depth. A variety of variants, so that the pump runs under industrial and mining. Long service life, high operating efficiency, can meet a variety of poor transport conditions.
Model meaning
4 / 3 D -
4-------Suction diameter(Inch)
3-------Discharge diameter(Inch)
D-------Support type
------Slurry pump type
Specifications
| Pump Model | 4 / 3 D - |
| Allowable Max.Power | 60 kw |
| Capacity | 86.4- 198 m³/h |
| Head | 9 - 52 m |
| Speed | 1000 -2200 r/min |
| Meax.Eff. | 71% |
| NPSH | 4 - 6 m |
| Impeller Diameter | 245 mm |
Typical Applications:
Ash Handling
Cyclone Feeds
Pulp and Paper
Abrasive Slurries
Coal Preparation
Mineral Processing
Aggregate Processing
Construction Design
Shaft Seal Module Design
Performance table
| MODEL | ALLOWABLE MATING | MATERIAL | CLEAN WATER PERFORANCE | IMPELLER | |||||||
| MAX.POWER | LINER | IMPELLER | Q Capacity | H Head | Speed | Max. Eff. | NPSH | VANES NO. | IMPELLER DIA | ||
| (KW) | m3/h | L/s | (m) | n(r/min) | (%) | (m) | (mm) | ||||
| 1.5/B- | 15 | M | M | 12.6-28.8 | 3.5-8 | 6-68 | 1200-3800 | 40 | 2--4 | 5 | 152 |
| RU | RU | 10.8-25.2 | 3--7 | 7-52 | 1400-3400 | 30 | 3 | ||||
| 1/1.5B- | 15 | M | M | 16.2-34.2 | 4.5-9.5 | 25-92 | 1400-2200 | 20 | 2-5.5 | 5 | 330 |
| 2/1.5B- | 15 | M | M | 32.4-72 | 9--20 | 6-58 | 1200-3200 | 45 | 3.5-8 | 5 | 184 |
| RU | RU | 25.2-54 | 7--15 | 5.5--41 | 1000-2600 | 50 | 2.5-5 | 5 | 178 | ||
| 3/2C- | 30 | M | M | 39.6-86.4 | 11--24 | 12-64 | 1300-2700 | 55 | 4--6 | 5 | 214 |
| RU | RU | 36-75.6 | 10--21 | 13-46 | 1300-2300 | 60 | 2--4 | 5 | 213 | ||
| 3/2D-HH | 60 | M | M | 68.4-136.8 | 19-38 | 25-87 | 850-1400 | 47 | 3-7.5 | 5 | 457 |
| 4/3C- | 30 | M | M | 86.4-198 | 24-55 | 9-52 | 1000-2200 | 71 | 4--6 | 5 | 245 |
| RU | RU | 79.2-180 | 22-50 | 5-34.5 | 800-1800 | 59 | 3--5 | ||||
| 4/3E-HH | 120 | M | M | 126-252 | 35-70 | 12-97 | 600-1400 | 50 | 2--5 | 5 | 508 |
| 6/D- | 60 | M | M | 162-360 | 40-100 | 12-56 | 800-1550 | 65 | 5--8 | 5 | 365 |
| RU | RU | 144-324 | 40-90 | 12-45 | 800-1350 | 65 | 3--5 | 5 | 365 | ||
| 6/4S-HH | 560 | M | M | 324-720 | 90-200 | 30-118 | 600-1000 | 64 | 3--8 | 5 | 711 |
| 6S-HH | 560 | M | M | 468-1008 | 130-280 | 20-94 | 500-1000 | 65 | 4--12 | 5 | 711 |
| 8/6E- | 300 | M | M | 360-828 | 100-230 | 10-61 | 500-1140 | 72 | 2--9 | 5 | 510 |
| RU | RU | 324-720 | 90-200 | 7-49 | 400-1000 | 65 | 5--10 | 5 | 510 | ||
| 10/8E-M | 120 | M | M | 666-1440 | 185-400 | 14-60 | 600-1100 | 73 | 4--10 | 5 | 549 |
| 10/8ST- | 560 | M | M | 612-1368 | 170-380 | 11-61 | 400-850 | 71 | 4--10 | 5 | 686 |
| RU | RU | 540-1118 | 150-330 | 12-50 | 400-750 | 75 | 4--12 | ||||
| 12/10ST- | 560 | M | M | 936-1980 | 260-550 | 7-68 | 300-800 | 82 | 6 | 5 | 762 |
| RU | RU | 720-1620 | 200-450 | 7-45 | 300-650 | 80 | 2.5-7.5 | ||||
| 14/12ST- | 560 | M | M | 1260-2772 | 350-770 | 13-63 | 300-600 | 77 | 3--08 | 5 | 965 |
| RU | RU | 1152-2520 | 320-700 | 13-44 | 300-500 | 79 | 3--10 | ||||
| 16/14TU- | 1200 | M | M | 1368-3060 | 380-850 | 11-63 | 250-550 | 79 | 4--10 | 5 | 1067 |
| 20/18TU- | 1200 | M | M | 2520-5400 | 700-1500 | 13-57 | 200-400 | 85 | 5--10 | 5 | 1370 |
Tel: 86-- 031180809622
Fax: 86--031168050656
