Leak - Free High Concentration Heavy Duty Slurry Pump 4/3 Metal Materials

Leak-Free High Concentration Slurry Pump,4 / 3 Metal Centrifugal Pump

Main introduction of slurry pump

Pump body pump cover and over-current components: This series of pumps is a horizontal, vertical medium-sized, double-pump shell structure slurry pump. The pump body and pump cover are equipped with a replaceable metal lining. The lining is made of high-chromium wear-resistant alloy material. The lining can be used until wear-through, extending the maintenance period and reducing operating costs. The pump outlet direction can be rotated and installed at 8 angles.
Bearing assembly: The bearing assembly of the pump adopts a cylindrical structure, which is convenient for adjusting the clearance between the impeller and the front guard plate, and can be completely removed during maintenance. The bearings are greased.
Shaft seal (seal): The shaft seal type of the pump has packing seal, impeller seal and mechanical seal.
Transmission mode: V-type V-belt drive, flexible coupling drive, gear reducer drive, fluid coupling drive, variable frequency drive, thyristor speed control, etc. Among them, the V-shaped V-belt drive has CL, CV, CR, ZL, ZV, ZR transmission.
Overall performance: The pump has a wide performance range, good cavitation performance and high efficiency. Multi-stage series technology can be used to meet long-distance transportation. Overcurrent components are available in a variety of metals and add depth. With a variety of speeds and a variety of variants, the pump operates under optimal industrial and mining conditions. Long service life and high operating efficiency can meet a variety of harsh conveying conditions.

Model meaning 

4 / 3 C - (R)

4------------Suction diameter(Inch)

3------------Discharge diameter(Inch)

C-----------Support type

-------- Pump Model

R-----------Natural Rubber

Specifications

Features

1). Cantilever, horizontal Slurry discharging pump

2). Excellent hydraulic performance, high efficiency, and low wear rate

3). Better wear-resistance and corrosive resistance

4). Frame plate for type pumps have replaceable wear-resistant metal liners or rubber liners. The impellers are made of wear-resistant metal or rubber

5). In allowable pressure range, it can be used in series in stages, and allowable maximum working pressure is 3.6Mpa.

6). Centrifugal seal, mechanical seal and packing seal are available .

7). The discharge branch can be positioned at interval of 45 degrees by request and oriented to any eight positions to suit installations and applications.

Typical Applications:

Ash Handling

Cyclone Feeds

Pulp and Paper

Abrasive Slurries

Coal Preparation

Mineral Processing

Aggregate Processing

Use

In the application of the concentrator, about 80% are used in the mining industry concentrator. Due to the poor working conditions of ore primary selection, the service life of the slurry pump is generally low in this section. Of course, different ores have different abrasive properties. If the relative abrasiveness is reduced in the section such as concentrate transportation, the overall service life of the pump will be longer. Therefore, when the general user frequently asks about the service life of the supplier's product during the procurement process, it is strictly said that any manufacturer and the like will not promise an accurate life cycle for the user because of the service life of the overcurrent component. The life of (wear and corrosion resistant parts) depends on many different factors, and the diversity and complexity of the working conditions lead to differences in the service life of materials of the same quality.

Construction Design

Shaft Seal Module Design

Performance table