Product Details:
Payment & Shipping Terms:
|
| Name: | 12 Inch Gravel Sand Pump | Pump Model: | 12 /10F-G(H) |
|---|---|---|---|
| Pump Inlet: | 12 Inch | Pump Outlet: | 10 Inch |
| Pump Material: | High Chrome A05 | Type: | Big Particle |
| High Light: | sand and gravel dredge pumps,sand and gravel pump |
||
Heavy Duty Big Particle Gravel Sand Pump 12 Inches Universal Abrasion Resistance
Product features
1. Abrasion-resistance,corrosion-resistance; large capacity; wide flow channel; light weight; good
performance of NPSH; easy maintenance; anti-clogging.
2. Special clamping device of the jointing for pump body and pump cover enables the pump
discharge point to any direction.
3. The wet parts , including impeller, frame plate, throatbush, frame plate liner insert, all adopt
anti-corrosive alloy cast iron or steel.
4. The pump consists of pump head, seal assembly, bearing assembly and frame. The bearing
assembly is lubricated by grease.
5. The pump can be driven by V-belt, coupling directly or by reducer.
6. Packing seal, expeller seal and mechanical seal are all available for the pump.
Type meaning for dredge pump
12 / 10 F-G(H)
12----------------pump inlet size (inch )
10----------------pump outlet size (inch)
F-----------------Support Type
G-----------------Pump Model
H-----------------Gravel Pump High Head
Operating Limits
1. Inlet diameter:6-32 inch(150-812 mm)
2. Discharge diameter:4-28 inch(100-711 mm)
3. Flow capacity:36-14400 m3/h
4. Head :5-90 m
G(H) gravel pump material list for parts:
| Part Name | Material | Specification | HRC | Application | OEM Code |
| Bowl, door, back liner & impeller | Metal | AB27: 23%-30% chrome white iron | ≥56 | Used for higher wear condition with pH between 5 and 12 | A05 |
| AB15: 14%-18% chrome white iron | ≥59 | Used for higher wear condition | A07 | ||
| AB29: 27%-29% chrome white iron | 43 | Used for lower pH condition especially for FGD. It also can be used for low-sour condition and desulfuration installation with pH no less than 4 | A49 | ||
| AB33: 33%-37% chrome white iron | It can transport oxygenated slurry with pH not be less than 1 such as phospor-plaster, nitric acid, vil, phosphate etc. | A33 | |||
| Expeller & expeller ring | Metal | B27: 23%-30% chrome white iron | ≥56 | Used for higher wear condition with pH between 5 and 12 | A05 |
| Grey iron | G01 | ||||
| Stuffing Box | Metal | AB27: 23%-30% chrome white iron | ≥56 | Used for higher wear condition with pH between 5 and 12 | A05 |
| Grey iron | G01 | ||||
| Door clamp plate, bearing house & base | Metal | Grey iron | G01 | ||
| Ductile iron | D21 | ||||
| Shaft | Metal | Carbon steel | E05 | ||
| Shaft sleeve, lantern ring/resctrictor, neck ring, gland bolt | Stainless steel | 4Cr13 | C21 | ||
| 304 SS | C22 | ||||
| 316 SS | C23 | ||||
| Joint rings & seals | Rubber | Butyl | S21 | ||
| EPDM rubber | S01 | ||||
| Nitrile | S10 | ||||
| Hypalon | S31 | ||||
| Neoprene | S44/S42 | ||||
| Viton | S50 |
Performance table:
| Pump Model | Allowable | Clear Water Performance | ||||
| Max. Power | Capacity Q | Head | Speed | Max.Eff. | Impeller. Dia. (mm) | |
| (kw) | m3/h | H (m) | n(r/min) | (%) | ||
| 6/4D-G | 60 | 36-250 | 5-52 | 600-1400 | 58 | 378 |
| 8/6E-G | 120 | 126-576 | 6-45 | 800-1400 | 60 | 378 |
| 10/8S-G | 560 | 216-936 | 8-52 | 500-1000 | 65 | 533 |
| 10/8F-G | 260 | 216-936 | 8-52 | 500-1000 | 65 | 533 |
| 10/8S-GH | 560 | 180-1440 | 24-80 | 500-950 | 72 | 711 |
| 12/10F-G | 260 | 360-1440 | 10-60 | 400-850 | 65 | 667 |
| 12/10G-G | 600 | 360-1440 | 10-60 | 400-850 | 65 | 667 |
| 12/10G-GH | 600 | 288-2808 | 16-80 | 350-700 | 73 | 950 |
| 14/12G-G | 600 | 576-3024 | 8-70 | 300-700 | 68 | 864 |
| 16/14G-G | 600 | 720-3600 | 18-44 | 300-500 | 70 | 1016 |
| 16/14TU-G | 1200 | 324-3600 | 26-70 | 300-500 | 72 | 1270 |
| 18/16G-G | 600 | 720-4320 | 12-48 | 250-500 | 72 | 1067 |
| 18/16TU-G | 1200 | 720-4320 | 12-48 | 250-500 | 72 | 1067 |
Construction Drawing
Tel: 86-- 031180809622
Fax: 86--031168050656
