Product Details:
Payment & Shipping Terms:
|
| Pump Name: | Foam Concrete Pump/foam Froth Slurry Pump | Flow Rate: | 6m3/h-600m3/h |
|---|---|---|---|
| Delivery Head: | 6-30m | Speed: | 350rpm-1800rpm |
| Keyword: | Froth Pump | Brand: | SHIZA |
| High Light: | foam concentrate transfer pump,vertical centrifugal pump |
||
Product overview
The basic principle of the froth pump operation is to de-aerate or partially de-aerate the froth before it enters the pumping. Its handling capacity of the pump is much higher than that of other types of slurry pump without shaft seal and sealing water.
Structure features
1. Bearing assembly of AF series in the same with that of SP,SPR series .Bearing housing with motor
base or supporting plate ,i.e.pump and motor are connected either directly with coupling or
through pulley operating conditions.
2. Feeding tank can be steel , stainless steel or coated with rubber with overflow box and tangential
inlet.the former can transmit be excessive incoming slurry back to its pit,while the latter will allow the
slurry quickly get into the pump body and make part of the foams disappear.
3. Double case for AF foam pump ,Wetted parts are metal lined ,rubber lined or of other
non-metallic liner based on you requiring
Usage
AF slurry pumps are widely used in the mining,coal washing,power plant,metallurgy,
petrochemical ,building material,dredging and other industrial departments ,etc.It is ideal product
for the transporting of slurries with lots of froth,especially the slurries in the flotation process.
AF froth pump material list for parts
| VOLUTE | IMPELLERS | BASE | EXPELLER | EXPELLER RING | SHAFT SLEEVE | SEALS | |
| Standard | High Chrome Alloy | High Chrome Alloy | Cast Iron | Chrome Alloy | Chrome Alloy | SG Iron | Natural Rubber |
| or | or | ||||||
| SG Iron | SG Iron | ||||||
| Options | SG Iron | SG Iron | Mild Steel | SG Iron | SG Iron | EN56C | Nordel |
| Ferralium | Neoprene | ||||||
| Hasteloy C | Viton | ||||||
| Ceramic | Butyl | ||||||
| Stellite | EPDM | ||||||
| Chrome Oxide |
Performance table for froth pump
| Pump Model | Capacity (m3/h) | Head (m) | Speed (r/min) | Eff. (%) | Installed with power(kw) | Diameter | |
| Inlet(mm) | Outlet(mm) | ||||||
| 2QV-AF | 7.6-42.8 | 6-29.5 | 800-1800 | 45 | 15 | 100 | 50 |
| 3QV-AF | 23-77.4 | 5-28 | 700-1500 | 55 | 18.5 | 150 | 75 |
| 4RV-AF | 33-187.2 | 5-28 | 500-1050 | 55 | 37 | 150 | 100 |
| 6SV-AF | 80-393 | 5-28 | 250-680 | 55 | 75 | 200 | 150 |
| 8SV-AF | 126-575 | 5.8-25.5 | 350-650 | 55 | 110 | 250 | 200 |
Quality control
| Inspection Equipment | |
| 1. Inspection and Detection | |
| With various inspection and detection instruments ,like three-coordinate measuring instrument ,metallographic microscope, direct reading spectrometer ,Brinell hardness meter ,Vickers hardness meter, carbon and sulfur analyzer and other detection equipment,we can carry on the chemical composition analysis ,physical properties test ,coordinate measurement for various steel&steel materials | |
| Complete pump set inspection | |
| We have performance testing platform for each batch pump inspection before delivery | |
| Quality control system for each set slurry pump | |
|
purchasing raw material ra |
1. Strict rules and procedures to choose the raw material supplier |
| 2. Each batch raw material will be tested by quality control department | |
|
C casting of parts
|
1 .Melting:Chemical element analysis for raw material before and after stove . |
| 2.Moulding :Strict sand moulding qualified before iron liquid pouring for casting | |
| 3. Cleaning semi-finished parts sand :Strict inspection on the appearance and size qualified before storage. | |
Machining of slurry pump |
1. Self -inspection and inspection between different steps. |
| 2. First part inspection | |
| 3. Procedures inspection | |
| 4..Inspection before storage the mining slurry pumps | |
|
A A Assembly |
1. Inspector tracks the whole process of assembly of slurry pumps |
| 2. Slurry Pump pressure inspection and fillout the testing table | |
| 3. Painting inspection | |
| 4. Performance testing and fillout the testing table | |
| 5. Packing inspection of slurry pump | |
| 6. Issue quality certificate | |
Tel: 86-- 031180809622
Fax: 86--031168050656
