Product Details:
Payment & Shipping Terms:
|
| Brand Name: | SZ-pump | Material: | High Chrome Wet End Parts Pump Or Rubber Pump |
|---|---|---|---|
| Liquid Temp: | Lower Than 80℃ | Motor Voltage: | 220V/380V/440V |
| Fuel: | Diesel / Electric | Surface Treatment: | Anti-corrosion Painted |
| High Light: | high density solids pump,dry sand pump |
||
Features
1. The pumps are cantilevered , horizontal, centrifugal slurry pump
2. Designed for handling highly abrasive , highly density slurries in the metallurgical, mining, coal, power building material and other industrial departments.
3. The Pump of this type also can be installed in multistage series.
4. centrifugal slurry pumps and spare parts can fully interchange with world famous brand
5. The pumps maybe adoptable of gland seal or expeller seal.
Parameters range
R pump operating limits:
Size range (discharge) : 1 inch to 18 inch
Capacity: 3.6--6480 m3/h
Heads: 4--69 m (13 to 230 feet)
Max allowable particle size: Depend on pump model
Drive type
DC Type: The output shaft of a motor is directly connected to the input shaft of a pump via a pump coupler. This type of connection is suitable for applications where the speed of the slurry pump is the same as that of the motor.
CV Type: The pump is driven by a belt connected to the crankshaft of the engine. This way of connection allows for saving space, easy installation, and fast adjustment of pumping speed. The motor is fixed to the motor support frame which is located on the bearing support above the slurry pump.
ZVZ Type: Another type of belt drive that allows easy adjustment of pumping speed. The motor is directly fixed to the bearing support. This way of installation is suitable for motors with larger horsepower than is possible with CV type of installation. Due to the installation of motor onto the bearing support, this method helps save installation space.
CRZ Type: This type of belt drive makes it easier to adjust pumping speed. The installation allows both the motor and slurry pump to be fixed to the ground. The motor is installed to the side of the pump. This installation method is suitable for large-power motors.
Application of slurry pump
Minerals Flotation Processing
Electric Factory Coal Preparation
Coal Washing
Chemical Medium Processing
Effluent Handling
Sand And Gravel Handling
Drive type :
Structure of slurry pump
| METAL LINED PUMPS | RUBBER LINED PUMPS | ||||
| No. | Part Description | Material Specification | No. | Part Description | Material Specification |
| 1 | Base | Cast Iron | 1 | Base | Cast Iron |
| 2 | Shaft | 4140 High Tensile Steel* | 2 | Shaft | 4140 High Tensile Steel* |
| 3 | Bearing Assembly | Timken (Cast Iron Body) | 3 | Bearing Assembly | Timken (Cast Iron Body) |
| 4 | Shaft Sleeve | 420 Stainless Steel | 4 | Shaft Sleeve | 420 Stainless Steel |
| 5 | Pump Casing | Cast Iron | 5 | Pump Casing | Cast Iron |
| 6 | Frame Plate Liner | 27% Chrome White Iron | 6 | Frame Plate Liner Insert | Rubber |
| 7 | Volute Liner | 27% Chrome White Iron | 7 | Cover Plate Liner | Rubber |
| 8 | Impeller | 27% Chrome White Iron | 8 | Impeller | Rubber Coated High Tensile Steel |
| 9 | Throat Bush | 27% Chrome White Iron | 9 | Throat Bush | Rubber |
| 10 | Joint Rings | Rubber | 10 | Cover Plate | Cast Iron |
| 11 | Cover Plate | Cast Iron | 11 | Stuffing Box | Cast Iron |
| 12 | Stuffing Box | Cast Iron | 12 | Expeller | 27% Chrome White Iron |
| 13 | Expeller | 27% Chrome White Iron | 13 | Expeller Ring | Natural Rubber |
| 14 | Expeller Ring | Natural Rubber | 14 | Bolts | Zinc Plated Steel |
| 15 | Bolts | Zinc Plated Steel | 15 | O-rings | Nitrile Rubber |
| 16 | O-rings | Nitrile Rubber | 16 | Seals | Rubber |
| 17 | Seals | Rubber | Bolts | Zinc Plated Steel | |
| Bolts | Zinc Plated Steel | ||||
Tel: 86-- 031180809622
Fax: 86--031168050656
