Big Capacity High Head Heavy Duty Slurry Pump In Mine Dewatering 12 / 10 ST -

Big Capacity High Head Heavy Duty Slurry Pump In Mine Dewatering 12 / 10 ST -

Main introduction of slurry pump

12/10ST- is high discharge head slurry pumps which is horizontal cantilevered centrifugal pump.Impeller allows a certain size of material through, submerged slurry pump, if the size of excessive material into the suction pipeline may cause impeller inlet blockage, thus limiting pump discharge, this failure often leads to power decline and outlet pressure and suction vacuum reduction.

Model meaning 

12 /10 ST -

12-------Suction diameter(Inch)

10-------Discharge diameter(Inch)

ST-------Support type

------ Slurry pump type

Specifications

Features

1). Cantilever, horizontal Slurry discharging pump

2). Excellent hydraulic performance, high efficiency, and low wear rate

3). Better wear-resistance and corrosive resistance

4). Frame plate for type pumps have replaceable wear-resistant metal liners or rubber liners. The impellers are made of wear-resistant metal or rubber

5). In allowable pressure range, it can be used in series in stages, and allowable maximum working pressure is 3.6Mpa.

6). Centrifugal seal, mechanical seal and packing seal are available .

7). The discharge branch can be positioned at interval of 45 degrees by request and oriented to any eight positions to suit installations and applications.

Typical Applications:

Ash Handling

Cyclone Feeds

Pulp and Paper

Abrasive Slurries

Coal Preparation

Mineral Processing

Aggregate Processing

Construction Design

Shaft Seal Module Design

Performance table