Bare Shaft Coal Mining Heavy Duty Sludge Pump For Mining Industry Alloy A05 A49 A07

Bare Shaft Centrifugal Slurry Pump for coal mining,Alloy A05 A49 A07 slurry pump for mining industry

Main introduction:

1. CAD modern design ,super hydraulic performance , high efficiency and lower abrasive rate .Wide

    passage , non-clogging and good performance of NOSH;

2. Expeller combined with packing seal and mechanical seal have be adopted to guarantee the slurry

    from leakage ;

3. Reliability design ensures long MTBF(mean time between events);

4. The metric bearing with oil lubrication,reasonable lubrication and cooling systems ensure the bearing

    to be operated under the low temperature;

5. The material of wet parts have the good performance of anti-wearing and anti-corrosion .

6. The pump can be used for seawater ash-removing to prevent it from the corrosion of seawater ,salt

    and mist ,and electrichemical corrosion ;

7.The pump can be operated in series with multistage within allowable pressure .The allowable maximum

    working pressure is 3.6Mpa .

Appliccation:

The series of pump has the advantage of reasonable construction ,high efficiency,reliable operation and

asy maintenance .it can be widely used for handling the mixture contained of abrasive and corrosive solids in electric power ,metallurgy ,mine ,coal ,constructional material and chemical industry departments

 especial for removing ash and sludge in electric power station.

Type meaning

100ZGB(P)

100-------------pump discharge size (mm)

Z----------------slurry pump

G----------------high head

B---------------- slurry pump

P-----------------Multi-stage pumps (3-4stage)