Product Details:
Payment & Shipping Terms:
|
Brand Name: | Shiza | Usage: | Slurry Pumping |
---|---|---|---|
Theory: | Centrifugal Pump | Structure: | Single-stage Pump |
Pressure: | High Pressure | ||
High Light: | heavy duty sludge pump,industrial acid pumps |
Anti - Abrasive Rubber Lined Centrifugal Pumps , Horizontal Centrifugal Pump Long Lifespan
Introduction:
12/10ST- designed for handing strong abrasive d high concentrationi slurries, series slurry pumps are cantilevered heavy duty slurry pumps with metal liner .With thick weak parts and heavy duty support, series could run in series in the allowable range of pump working pressure.This series have become the first choice of various working conditions and clients from home and abroad think highly of series's excellent performance.They are widely used in the mining,coal washing,power plant,metallurgy,petrochemcial,buidling and other industrial departments,etc.
The type slurry pumps have pump bodies (volute liners, front and back liners) that consist of replaceable wear-resistant rubber liners, and impellers can also apply wear-resistant rubber material. The HH type slurry pumps only apply wear-resistant metal material as their pump bodies and impellers.
Product Advantages
1. The rubber liner is designed to be watertight when it is used in heavy duty.
2.The special design is made for such liner, so that the operating cost can be reduced by allowing replacement of individual components.
3. As the natural rubber is used, this cover plate liner has excellent erosion resistance and chemical resistance and allowing higher operating temperature.
4. all parts produced and cover plate liner has long service life.that we are performed on them with strict dimensional inspection.
Type Notaion
Model | 12/10ST-(R) |
12 | Suction Diameter(Inch) |
10 | Discharge Diameter(Inch) |
ST | Support Type |
Heavy Duty | |
R | Natural Rubber |
Specifications
Model | 12 / 10 ST - (R) |
Allowable Max. Power | 560 Kw |
Capacity | 720 - 1620 m³ / h |
Head H | 7 - 45 m |
Speed | 300 - 650 r / min |
Max. eff | 80 % |
NPSH | 2.5 - 7.5 m |
Impeller | 762 mm |
Typical Applications:
-Ash Handling
-Cyclone Feeds
-Pulp and Paper
-Abrasive Slurries
-Coal Preparation
-Mineral Processing
-Aggregate Processing
Shaft Seal Module Design
Selection And Performance Chart
Tel: 86-- 031180809622
Fax: 86--031168050656