Product Details:
Payment & Shipping Terms:
|
| Structure: | Centrifugal Horizontal Pump | Color: | Blue/yellow Or Based On You Need |
|---|---|---|---|
| MOQ: | 1 Unit | HS Code: | 8413709990 |
| Pump Model: | 4/3C- Slurry Pump | Inlet: | 4inch |
| Outlet: | 3inch | Bracket Type: | C Bracket |
| Pump Type: | Slurry Pump | ||
| Highlight: | abrasive slurry pump,horizontal slurry pump |
||
Product overview
Type (R)/HH/M(R) pumps are cantilevered,horizontal and centrifugal slurry pumps. Mud pumps, impurity pumps, dredge pumps and desilting pumps all belong to category of slurry pumps.
Type meaning
| Type meaning for mineral centrifugal slurry pump | |
| 4/3C- slurry pump | |
| 4 | Pump inlet size (inch ) 4 |
| 3 | Pump outlet size (inch)3 |
| C | Bracket type |
| Pump Model | |
| R | R-Rubber liner pump |
Support Type Description
Structure of slurry pump
1. Bearing assembly – A large diameter shaft with short overhang minimizes deflection and contributes
to long bearing life. Only four through bolts are required to hold the cartridge type housing in the
frame.
2. Liners – Easily replaceable liners are bolted, not glued, to the casing for positive attachment and
ease of maintenance. Hard metal liners are completely interchangeable with pressure molded
elastomers.
3. Casing – Casing halves of cast or ductile iron with external reinforcing ribs provide high operating
pressure capabilities and an extra measure of safety.
4. Impeller – Front and rear shrouds have pump out vanes that reduce recirculation and seal
contamination. Hard metal and molded elastomer impellers are completely interchangeable. Cast in
impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
5. Throat bush – Wear is reduced and maintenance simplified by the use of tapered mating faces to
allow positive accurate alignment during assembly and simple removal.
Performance table of (R) / HH / M(R)
| MODEL | ALLOWABLE MATING MAX.POWER (KW) |
MATERIAL | CLEAN WATER PERFORANCE | IMPELLER | |||||||
| LINER | IMPELLER | Q Capacity | H Head | Speed | Max. Eff. | NPSH | VANES NO. | IMPELLER DIA | |||
| m3/h | L/s | (m) | n(r/min) | (%) | (m) | (mm) | |||||
| 1.5/B- | 15 | M | M | 12.6-28.8 | 3.5-8 | 6-68 | 1200-3800 | 40 | 2--4 | 5 | 152 |
| RU | RU | 10.8-25.2 | 3--7 | 7-52 | 1400-3400 | 30 | 3 | ||||
| 1/1.5B- | 15 | M | M | 16.2-34.2 | 4.5-9.5 | 25-92 | 1400-2200 | 20 | 2-5.5 | 5 | 330 |
| 2/1.5B- | 15 | M | M | 32.4-72 | 9--20 | 6-58 | 1200-3200 | 45 | 3.5-8 | 5 | 184 |
| RU | RU | 25.2-54 | 7--15 | 5.5--41 | 1000-2600 | 50 | 2.5-5 | 5 | 178 | ||
| 3/2C- | 30 | M | M | 39.6-86.4 | 11--24 | 12-64 | 1300-2700 | 55 | 4--6 | 5 | 214 |
| RU | RU | 36-75.6 | 10--21 | 13-46 | 1300-2300 | 60 | 2--4 | 5 | 213 | ||
| 3/2D-HH | 60 | M | M | 68.4-136.8 | 19-38 | 25-87 | 850-1400 | 47 | 3-7.5 | 5 | 457 |
| 4/3C- | 30 | M | M | 86.4-198 | 24-55 | 9-52 | 1000-2200 | 71 | 4--6 | 5 | 245 |
| RU | RU | 79.2-180 | 22-50 | 5-34.5 | 800-1800 | 59 | 3--5 | ||||
| 4/3E-HH | 120 | M | M | 126-252 | 35-70 | 12-97 | 600-1400 | 50 | 2--5 | 5 | 508 |
| 6/D- | 60 | M | M | 162-360 | 40-100 | 12-56 | 800-1550 | 65 | 5--8 | 5 | 365 |
| RU | RU | 144-324 | 40-90 | 12-45 | 800-1350 | 65 | 3--5 | 5 | 365 | ||
| 6/4S-HH | 560 | M | M | 324-720 | 90-200 | 30-118 | 600-1000 | 64 | 3-8 | 5 | 711 |
| 6S-HH | 560 | M | M | 468-1008 | 130-280 | 20-94 | 500-1000 | 65 | 4-12 | 5 | 711 |
| 8/6E- | 300 | M | M | 360-828 | 100-230 | 10-61 | 500-1140 | 72 | 2-9 | 5 | 510 |
| RU | RU | 324-720 | 90-200 | 7-49 | 400-1000 | 65 | 5-10 | 5 | 510 | ||
| 10/8E-M | 120 | M | M | 666-1440 | 185-400 | 14-60 | 600-1100 | 73 | 4-10 | 5 | 549 |
| 10/8ST- | 560 | M | M | 612-1368 | 170-380 | 11-61 | 400-850 | 71 | 4-10 | 5 | 686 |
| RU | RU | 540-1118 | 150-330 | 12-50 | 400-750 | 75 | 4-12 | ||||
| 12/10ST- | 560 | M | M | 936-1980 | 260-550 | 7-68 | 300-800 | 82 | 6 | 5 | 762 |
| RU | RU | 720-1620 | 200-450 | 7-45 | 300-650 | 80 | 2.5-7.5 | ||||
| 14/12ST- | 560 | M | M | 1260-2772 | 350-770 | 13-63 | 300-600 | 77 | 3-8 | 5 | 965 |
| RU | RU | 1152-2520 | 320-700 | 13-44 | 300-500 | 79 | 3-10 | ||||
| 16/14TU- | 1200 | M | M | 1368-3060 | 380-850 | 11-63 | 250-550 | 79 | 4-10 | 5 | 1067 |
| 20/18TU- | 1200 | M | M | 2520-5400 | 700-1500 | 13-57 | 200-400 | 85 | 5-10 | 5 | 1370 |
Tel: 86-- 031180809622
Fax: 86--031168050656
