Product Details:
Payment & Shipping Terms:
|
| Material: | A05 Material | Drive Type: | CV, DC(Z), ZV(Z), CR(Z) |
|---|---|---|---|
| Principle: | Suction Centrifugal | Use: | Deal Mining Tailings |
| Type: | Horizontal | Pressure: | High Pressure |
| High Light: | high density solids pump,sand slurry pump |
||
Product overview
The lining of 8/6E- is made of high-chromium wear-resistant alloy. Lining is used for wear-out, extending maintenance intervals and reducing operating costs. The direction of the pump outlet can be rotated by 8 angle installation.Widely used in metallurgical,mining,coal,power,building material and other industrial departments etc.
Key features/benefits
1.Bearing assembly – a large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.
2.Liners-easily replaceable liners are bolted, not glued, to the casing for positive attachment and east of maintenance. Hard metal liners are completely interchangeable with pressure moulded elastomer.
3.Elastomer seal rings back all liner joints.
4.Casing–Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety.
5.Impeller–front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and moulded elastomer impellers are completely interchangeable.
6.Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
7.Throatbush–wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
8.One-piece frame – a very robust one-piece frame cradles the cartridge type bearing and shaft assembly.
9.An external impeller adjustment mechanism is provided below the bearing housing for easy adjustment of impeller clearance.
Specifications
| Pump Model | 8 / 6 E - |
| Allowable Max.Power | 120 kw |
| Capacity | 360-828 m³ / h |
| Head | 10-61 m |
| Speed | 500-1140 r / min |
| NPSH | 2-9 m |
| Max.Efficiency | 72% |
| Impeller Diameter | 510 mm |
Type meaning
| Type meaning for mineral centrifugal slurry pump | |
| 8/6E- | |
| 8 | Pump inlet size |
| 6 | Pump outlet size |
| E | Bracket type |
| slurry pump | |
| R | R-Rubber liner pump |
Support Type Description
Structure of slurry pump
Shaft Seal Module Design
Tel: 86-- 031180809622
Fax: 86--031168050656
