100RV-SP Industrial Vertical Sump Pumps / Non-Clog Sewage Submersible Pump

Introduction:

The 100RV-SP Industrial Vertical Sump Pumps Working Under The Liquid Non-Clog Pump is a vertical centrifugal slurry pump, immersed in liquid, suitable for mining, coal, metallurgy, electric power and other industrial sectors. Used to transport corrosive, coarse particles, high concentration slurry. The SP type pump is a vertical centrifugal slurry pump with the pump inlet vertically downward and the outlet vertically up on the other side of the pump.

The 100RV-SP Industrial Vertical Sump Pumps Working Under The Liquid Non-Clog Pump is mainly composed of lower filter, pump body, impeller, shaft, guard plate, bracket and other parts. The upper part of the pump has bearing support; the pump is installed under the liquid, no shaft seal is required, and the overcurrent parts are made of wear-resistant materials. The transmission type of this type of pump is BD and DC, namely belt drive and direct drive.

The depth under the immersion liquid can be determined according to the actual needs of the user within the standard size range. Rotate counterclockwise as seen from the pump suction port. 100RV-SP Industrial Vertical Sump Pumps Working Under The Liquid Non-Clog Pump scope of application: Mainly suitable for conveying corrosive, coarse particles, high concentration slurry. Widely used in metallurgy, mining, coal, electricity, building materials, environmental protection and other departments.

Type meaning

100 RV - SP 
100---------------Discharge Diameter 65 (mm)
RV---------------Support Type
SP---------------Sump pump

Specifications:

Usage

Submerged and vertical slurry pumps are mainly applicable to transport abrasive, coarse particle, high concentration slurry. They are widely used in metallurgy, mining, coal, electric power, building materials, environmental protection and other departments.

Construction Drawing