Custom Made Slurry Pump Parts DAM005M Bearing Assembly Bearing Housing For 6 / 4

Bearing Assembly:

The slurry pump bearing assembly, also called the rotor assembly, belongs to the slurry pump accessory assembly and is an important component of the slurry pump. It is a transmission power unit.

The bearing assembly is connected to the slurry pump and the motor components to form a complete working system. The stability of the slurry pump bearing assembly directly affects the operation and service life of the pump.

The bearing assembly on the picture is on a 6 / 4 slurry pump and the code is DAM005M.

The bearing assembly consists mainly of 11 components:

1, labyrinth(062) 2, grese cup(138) 3,  grease retainer(046) 4, bearing housing(004) 5, bearing (009)6, adjusting screw(001) 7, end cover(024) 8, shaft(073) 9, piston ring (108)10, labyrinth locknut & washer(061) 11, cover plate bolt(015)

Precautions:

The slurry pump bearing assembly is the heart of the whole pump. Although the value is not large compared to the whole pump, if the installation does not meet the technical requirements, the normal use of the whole pump cannot be guaranteed, and the slurry pump is adversely affected. The operation of the slurry pump:

A. Improve operator responsibility and conduct appropriate technical training
B, make a corresponding operational process
C. The operator and the repairman cooperate well and do the use and maintenance of the slurry pump.
D, new pump or new bearing assembly, to observe the bearing temperature, to control the operation at normal temperature, can not run for too long at too high temperature, otherwise it will damage the bearing

Warma slurry pump parts code:

-tell me the standard code no .we can quote you price immediately :

B1013, B15013, C2013, D3013, E4013, F6013, G8013, G10013, G12013, H14013, AL2013, BL5013,

EL15013, F8013, DH2013, EH3013, EG86013, ESH4013, FH4013, FG108013, FSH6013, GG10013,

GG1412292, GGH10292, EP4013, SL30013, FH6013, FHP6013, FG108013, GSH10013XM...

Pump replaced parts material:

1)  Material: D21, G01, A05, A49 ...

2) Shaft material: 45#, 40Cr, SS304, SS315...

3) Shaft sleeve material: 3Cr13, 4Cr13, SS304, SS316...

4) Lantern ring material: 304, 316, PTFE, Cu...

5) Bearing housing/ bearing end cover material: G01, D21...

6) Wet end part material: A05, A07, A49, A51, A33, A61, R08, R26, R33, R38, , S01, S12, S21, S42,  

     S50, U01, EPDM, PU, CR...

Structure of slurry pump

Spare parts materials