65QV - SP Vertical Centrifugal Rugged Wear-Resistant Sewage Sump Pump
Product Introduction
65QV - SP is a vertical centrifugal slurry pump, immersed in liquid, suitable for mining, coal, metallurgy, electric power and other industrial sectors. Used to transport corrosive, coarse particles, high concentration slurry. The SP type pump is a vertical centrifugal slurry pump with the pump inlet vertically downward and the outlet vertically upward on the other side of the pump. The pump is mainly composed of lower filter, pump body, impeller, shaft, guard plate, bracket and other parts. The upper part of the pump has bearing support; the pump is installed under the liquid, no shaft seal is required, and the overcurrent parts are made of wear-resistant materials. The transmission type of this type of pump is BD and DC, namely belt drive and direct drive. The depth under the immersion liquid can be determined according to the actual needs of the user within the standard size range. Rotate counterclockwise as seen from the pump suction port. SP type submerged slurry pump scope of application: It is mainly suitable for conveying corrosive, coarse particles and high concentration slurry. Widely used in metallurgy, mining, coal, electricity, building materials, environmental protection and other departments.
Type meaning
65 PV (L) - SP (R)
65---------------Discharge Diameter (mm)
PV---------------Support Type
L-----------------Extension type
SP---------------Sump pump
R-----------------Rubber lined
Specifications:
| Allowable Max.Power | 30kw |
| Capacity | 23.4-111m³/h |
| Head | 5-29.5m |
| Speed | 700-1500r/min |
| Max.Eff. | 50% |
| Impeller Dia. | 280mm |
Usage
Submerged and vertical slurry pumps are mainly applicable to transport abrasive, coarse particle, high concentration slurry. They are widely used in metallurgy, mining, coal, electric power, building materials, environmental protection and other departments.
| Inspection and Detection: |
| With various inspection and detection instruments ,like three-coordinate measuring instrument ,metallographic microscope, direct reading spectrometer ,Brinell hardness meter ,Vickers hardness meter, carbon and sulfur analyzer and other detection equipment,we can carry on the chemical composition analysis ,physical properties test ,coordinate measurement for various steel&steel materials |
| Complete pump set inspection: |
| We have performance testing platform for each batch pump inspection before delivery |
| Quality control system for each set pump: |
| Purchasing | 1. Strict rules and procedures to choose the raw material supplier |
| 2. Each batch raw material will be tested by quality control department |
| Casting | 1 .Melting:Chemical element analysis for raw material before and after stove . |
|
| 2. Moulding :Strict sand moulding qualified before iron liquid pouring for casting |
| 3. Cleaning semi-finished parts sand :Strict inspection on the appearance and size qualified before storage. |
| Machining | 1.Self -inspection and inspection between different steps. |
| 2.First part inspection |
| 3.Procedures inspection |
| 4..Inspection before storage the mining slurry pumps |
| Assembling | 1.Inspector tracks the whole process of assembly of slurry pumps |
| 2.Slurry Pump pressure inspection and fillout the testing table |
| 3.Painting inspection |
| 4.Performance testing and fillout the testing table |
| 5.Packing inspection of slurry pump |
| 6.Issue quality certificate |
Construction Drawing
