Payment & Shipping Terms:
|Material:||Cast Iron||Max Working Temperature:||120°C|
IS Horizontal Single Stage Single Suction Clean Water Centrifugal Pump
Description of IS Pump
IS horizontal single stage single suction clean water centrifugal pumps are widely used in industrial and urban water supply and discharge,fire control and agricultural irrigation etc. to handle clean water or liquid not containing solid particles and similar to clean water in physical and chemical properties.
They are featured by simple structure,dependable performance,small volume,light weight,good anti-cavitation performance,low power consumption,easy operation and maintenance,wide versatility and high interchangeability of parts.
The IS pump is designed according to the performance and dimensions specified in the international standard ISO2858. The pump is horizontally mounted, horizontally axially inhaled and spouted upwards.
Mainly consists of (1) pump body (2) pump cover (3) impeller (4) pump shaft (5) seal ring (6) shaft sleeve (7) suspension bearing components, etc. pump parts of type I pump, etc.Integrated.It is split from the back of the impeller, which is commonly referred to as the rear door structure.The utility model has the advantages that the maintenance is convenient, the pump body is not moved during the maintenance, the pipeline is sucked, the pipeline is discharged, and the rotor component is taken out for maintenance.The housing of the pump (ie the pump body and the pump cover) constitutes the working chamber of the pump, the impeller, the shaft and the rolling bearing are the rotors of the shaft.The suspension bearing component supports the rotor component of the pump, and the rolling bearing receives the radial and axial forces of the pump. The shaft seal of the pump is sealed with a soft packing. The bearing is a single row radial ball bearing, which is lubricated with lubricating oil. The material of the over-current component is generally ordinary gray cast iron. If the user has special requirements on the material, it can be determined with the factory. From the motor end, the pump rotor rotates clockwise.
Contact Person: Zhang