Product Details:
Payment & Shipping Terms:
|
| From: | China | MOQ: | 1 SET |
|---|---|---|---|
| Use: | Limestone & Gypsum Slurry | Structure: | Single Stage Pump |
| Material: | A05 | ||
| High Light: | high pressure slurry pump,horizontal slurry pump |
||
Single Suction Abrasive Industrial Sludge Pump For FGD System Ow Vibration
Features:
1. The distinct characteristic of our FGD engineering pump is double - casing and rubber lined
technology. Double - casing structure refers that the pump body is divided into outer pump shell and
inner lining. The former bears pressure and insulates slurry. The latter contact abrasive and corrosive
slurry. We only need to replace the worn out inner liner.
2. FGD engineering pump is mainly used to transport limestone and gypsum slurry. This requires the wet part performance will not only in anti - abrasive but also in anti - corrosive. Therefore, the wet parts ( such as impeller , volute liner and frame plate insert, etc . ) adopt A49 combined with rubber material 3. The engineering practice shows that the service life of components made by ours is triple or even higher than the traditional Cr30A product or duplex stainless steel pump.
Type meaning
600X-TLR
600: Diameter of discharge
X: Bracket Model (bearing lubricating way: diluted oil)
TL: FGD Pump
R: Rubber Liner Code
Samples
600X-TLR: The diameter of discharge: 600mm, bearing lubricating way: diluted oil, Rubber liner.
Application
Fuel gas Desulphurization Pump/FGD system Pump
TDT series axial inhalation single stage single suction centrifugal desulphurization pump can be widely
used to deliver limestone or gypsum grout for fas desulphurization systems of heat-engine plants,
aluminium manufacturers and oil refines. In the grout , the acceptable content of chlorine ion is
60000ppm ,and the acceotable Ph value is between 2.5-13 .
Performance Parameters
| Pump Model | 1000X - TL ( R) |
| Capacity | 10440 m³ / H |
| Head H | 15m |
| Speed | 485r / min |
| Max. eff. | 89 % |
| NPSH | 7.0m |
| Outlet DIa / Inlet Dia | 1000/1200 mm |
| Technical Characteristics | |
| 1 | The wearing parts adopted with CFD (Computational Fluid Dynamics) so as to designed |
| reliability and high efficiency. | |
| 2 | The position of the impeller can be changed by adjusting bearing assembly and the pump |
| unit can be in efficiency operation state. | |
| 3 | Pump is back disassembly type and needn’t dismantle the pipe connection so as to ensure |
| structure is simple and easy to maintain. | |
| 4 | Pump head use double rows taper roller bearings and drive end use cylindrical roller bearings, |
| bearings are lubricated with recycled dilute oil, improved the bearing working condition and | |
| increased service life. | |
| 5 | Mechanical seal adopted with containers type mechanical seal to ensure reliable running. |
| 6 | It is easy to maintain and repair and it is no need dismantling inlet and outlet water pipes. |
Tel: 86-- 031180809622
Fax: 86--031168050656
