Payment & Shipping Terms:
|Name:||Spare Parts||Pump Material:||High Chrome A05|
|Original:||China||Factory Or Not:||YES|
The suction cap of the desulfurization pump is a component of the desulfurization pump. The pump body, the suction cover and the discharge cover are fastened with bolts to form a working chamber of the desulfurization pump.
The desulfurization pump is a pump that can adapt to various working conditions, such as conveying acid, alkaline clear liquid or slurry; various corrosive pulps in the smelting industry; various dilute acids in the sulfuric acid industry; various types of sewage in the environmental protection industry, etc. .
The pump is both corrosion and wear resistant, and the desulfurization pump impeller has a wide range of applications. Has the following characteristics:
1) Strong wear resistance: The overcurrent parts are all made of steel-lined ultra-high molecular weight polyethylene (UHMW-PE). The wear resistance of ultra-high molecular weight polyethylene (UHMW-PE) ranks first in plastics, compared with nylon 66 ( PA66) and polytetrafluoroethylene (PTFE) are 4 times higher, which is 7-10 times higher than that of carbon steel .
2) Strong impact resistance: Ultra-high molecular weight polyethylene ranks first in general engineering plastics, and the front end cover of desulfurization pump is 5 times that of (/butadiene/styrene) copolymer (ABS). It is stable at minus 196 ° C, which is a characteristic not found in any other plastic.
3) Excellent corrosion resistance: The pump can withstand various corrosive media (acid, alkali, salt) and organic solvent within a certain temperature and concentration range, and is immersed in 80 kinds of organic solvents at 20 ° C and 90 ° C for 30 days. There is no abnormality in appearance, and other physical properties are almost unchanged.
Gravel pump spare parts material :
High chrome alloy: A05, A07, A49, etc.
Natural rubber: R08, R26, R33, R55, etc.
Other materials can be supplied as requirements .
Main parts name
Casting, shaft, throat bush, front liner, back liner, wear plate, case, cover, stuffing box, lantern restrictor,
cover plate bolt, volute, throat bush, shaft sleeve, cover plate liner, frame plate liner ,neck ring, expeller ring,expeller, bearing assembly, volute liner, volute packing, bowl, bearing cartridge, cover plate liner, impeller,closed impeller, open impeller
Other products we do
|Horizontal Slurry Pump of G, AH(R), M(R) series ;|
|We provide pumps with diameter range from 25mm to 1200mm, flow rates 5-30000m3/h and heads 5-120m.|
|2. Dredge Pump|
|G series dredge pumps of different types: single stage, single suction or double casing or horizontal
designs are all available. The diameter ranges from 100mm to 12000mm, flow rates 60-30000m3/h
and heads 10-120m.
|3. Desulfurization Pump|
We also provide TL(R) series FGD pump of different types, including single stage single suction FGD pump, double
casing FGD pump, horizontal desulfurization pump or centrifugal desulfurization pump. Flow rates range from 1083
|4. Spare Parts|
|Spare Parts that we offer include plate liner, impeller, expeller, volute liner, shaft and shaft sleeve, and etc.
Capacity:7500 tons of spare parts for machine products.
|Additionally, our company can produce pumps from different materials including high chromium white iron, super
high chromium hypereutectic white iron, low carbon high chromium alloy, carbon steel, stainless steel,
duplex stainless steel, ductile lron, grey iron, etc.
05 Chemical Composition:
Contact Person: Zhang