Payment & Shipping Terms:
|Material:||High Chrome Alloy A05||Hardness:||HRC58-62|
|Seal Type:||Expeller Ring Seal / Mechanical Seal||Type:||Horizontal|
|Fuel:||Diesel Or Electric||Usage:||Slurry Pumping|
The 1.5 / 1 B - AH pump is designed for the continuous pumping of highly abrasive, high density slurries with minimal maintenance requirements. The AH series will maintain high efficiencies over the wear life of its components.
All the spare parts are interchangeable/replaceable. The maximum mating power for this pump is 15Kw.
Slurry pump AH series it is heavy and powerful centrifugal installation, capable of pumping viscous and abrasive media.
Horizontal Slurry pump with a suction pipe. Pump parts are subject to a minimum abrasion during use, resistant to shocks and high pressure water. Do not create a big noise at work, do not vibrate. Protected against leakage of liquid.
The discharge connection may be arranged at intervals of 45 degrees on demand and in any direction of the 8 position for easier installation and use.
1.Material:The wet parts material for standard MAH series pump is high-chrome alloy. This kind of material is wear resistant and has excellent performance under erosive conditions.
2.Shaft Seal:There are three standard shaft seal methods:Packing seal, Expeller seal, Mechanical seal.
3.Bearing Assembly:Convenient to adjust the space between impeller and front liner and can be removed completely.
-Paper and Pulp
|Pump Model||1.5 / 1 B-AH|
|Allowable Max. Power||15 kw|
|Capacity||12.6 - 28.8 m³/h|
|Head||6 - 68 m|
|Speed||1200 - 3800r/min|
|NPSH||2 - 4 m|
|Impeller Diameter||152 mm|
|Type meaning for 1.5 / 1 B-AH|
|1.5 / 1 B-AHR|
|1.5||Pump inlet size (inch )|
|1||Pump outlet size (inch)|
|AH||AH slurry pump|
|R||R-Rubber liner pump|
Support Type Description
Selection And Performance Chart
Contact Person: Zhang