Payment & Shipping Terms:
|Pump Name:||Froth Centrifugal Slurry Pump Series AF||Flow Rate:||6m3/h-600m3/h|
|Froth Pump Material:||METAL A05||LINER:||RUBBER|
The basic principle of the froth pump operation is to de-aerate or partially de-aerate the froth before it enters the pumping. Its handling capacity of the pump is much higher than that of other types of slurry pump without shaft seal and sealing water.
1. Bearing assembly of AF series in the same with that of SP,SPR series .Bearing housing with motor
base or supporting plate ,i.e.pump and motor are connected either directly with coupling or
through pulley operating conditions.
2. Feeding tank can be steel , stainless steel or coated with rubber with overflow box and tangential
inlet.the former can transmit be excessive incoming slurry back to its pit,while the latter will allow the
slurry quickly get into the pump body and make part of the foams disappear.
3. Double case for AF foam pump ,Wetted parts are metal lined ,rubber lined or of other
non-metallic liner based on you requiring
AF slurry pumps are widely used in the mining,coal washing,power plant,metallurgy,
petrochemical ,building material,dredging and other industrial departments ,etc.It is ideal product
for the transporting of slurries with lots of froth,especially the slurries in the flotation process.
material list for parts
|VOLUTE||IMPELLERS||BASE||EXPELLER||EXPELLER RING||SHAFT SLEEVE||SEALS|
|Standard||High Chrome Alloy||High Chrome Alloy||Cast Iron||Chrome Alloy||Chrome Alloy||SG Iron||Natural Rubber|
|SG Iron||SG Iron|
|Options||SG Iron||SG Iron||Mild Steel||SG Iron||SG Iron||EN56C||Nordel|
Performance table for froth pump
|Pump Model||Capacity (m3/h)||Head (m)||Speed (r/min)||Eff. (%)||Installed with power(kw)||Diameter|
Contact Person: Zhang